做一个旧项目的维护，看到如下文档，看不懂，请大家帮忙，谢谢!!!!
Value: Several fields with the following structure:
1. Status (8 bits unsigned)
0. Finished
1. Busy
2. Error
3. Unable to measure (not enough power)
4. Unstable signal power
2. Start to Finish time * ms (16 bits)
Bits 0~11: *ms, unsigned
Bits 12~15: *16^, signed
Start to Finish time = [Bits 0~11] * 16^[Bits 12~15] ms
3. Start to current time * ms (16 bits)
Bits 0~11: *ms, unsigned
Bits 12~15: *16^, signed
Start to current time = [Bits 0~11] * 16^[Bits 12~15] ms
==》这里的16^[Bits 12~15]是什么意思？是指数表示法？为什么是16^而不是10^
比如：下命令到现在的时间为1小时，则
计算：1*60*60*1000=3600 000
Bits 0~11: *ms, 应该为：b1110 0001 0000
Bits 12~15: *16^, 应该为：b0011
Start to current time = [Bits 0~11] * 16^[Bits 12~15] ms
Start to current time：3E10
看代码，好像不对。
文档解释如下，可是大于[bit0-bit11]就不知道怎么表达了，用指数形式吗？
At 11:00:21 set gain from 7dB to 6dB, assume gain settle at 1200ms. ”set busy” pin as busy
At 11:00:22 cmd 0x00 00 response busy 01 0000 3E80