Vulkan Loader Specification and Architecture Overview_综合

转一篇Lunarg的关于Vulkan的Loader和Layer架构文章。 https://vulkan.lunarg.com/app/doc/1.0.13.0/windows/LoaderAndLayerInterface.html

Vulkan的Loader是开源的，Lunarg的SDK里有源代码；github上也有：https://github.com/KhronosGroup/Vulkan-LoaderAndValidationLayers

Loader的作用是管理系统里的多个ICD和多种Vulkan的Layer模块。Loader最终会构造一个instance级的调用链（instance call chain）和device级的调用链（device call chain）。

Loader同时也规定好了寻找ICD和Layer模块的方法。其基本思想是通过标准的json文件（即manifest文件）来查找模块（dll或者.so文件）。而不同的OS上，Loader会去不同的目录寻找可用的json文件。

对于Windows：

ICD：注册表 HKEY_LOCAL_MACHINE\SOFTWARE\Khronos\Vulkan\Drivers

Layers：注册表 HKEY_LOCAL_MACHINE\SOFTWARE\Khronos\Vulkan\ExplicitLayers

HKEY_LOCAL_MACHINE\SOFTWARE\Khronos\Vulkan\ImplicitLayers

对于Linux：

ICD：/usr/share/vulkan/icd.d /etc/vulkan/icd.d $HOME/.local/share/vulkan/icd.d

Layers：/usr/share/vulkan/explicit_layer.d /usr/share/vulkan/implicit_layer.d /etc/vulkan/explicit_layer.d /etc/vulkan/implicit_layer.d \$HOME/.local/share/vulkan/explicit_layer.d \$HOME/.local/share/vulkan/implicit_layer.d

当然，也可以用过设定环境变量来覆盖上述默认的位置。（VK_ICD_FILENAMES 和 VK_LAYER_PATH）

Vulkan Loader Specification and Architecture Overview

Goals of this document

Specify necessary functions and expected behavior of interface between the loader library and ICDs and layers for Windows, Linux and Android based systems. Also describe the application visible behaviors of the loader.

Audience

Application, Vulkan driver and Vulkan layer developers.

Any developers interested in understanding more about loader and layer behavior and architecture.

Loader goals

Support multiple ICDs (Installable Client Drivers) to co-exist on a system without interfering with each other.
Support optional modules (layers) that can be enabled by an application, developer or the system and have no impact when not enabled.
Negligible performance cost for an application calling through the loader to an ICD entry point.

Architectural overview of layers and loader

Vulkan is a layered architecture. Layers can hook (intercept) Vulkan commands to achieve various functionality that a Vulkan driver (aka ICD) or loader doesn’t support. Functionality such as Vulkan API tracing and debugging, API usage validation, and other tools such as framebuffer overlays are all natural candidates for Vulkan layers. Layers are implemented as libraries that are inserted between the application and the driver.

Not only is Vulkan a layered architecture but it also supports multiple GPUs and their drivers. Vulkan commands called by an application may wind up calling into a diverse set of modules: loader, layers, and ICDs. The loader is critical to managing the proper dispatching of Vulkan commands to the appropriate set of layers and ICDs. The Vulkan object model allows the loader to insert layers into a call chain so the layers can process Vulkan commands prior to the ICD being called.

Vulkan uses an object model to control the scope of a particular action / operation. The object to be acted on is always the first parameter of a Vulkan call and is a dispatchable object (see Vulkan specification section 2.2 Object Model). Under the covers, the dispatchable object handle is a pointer to a structure that contains a pointer to a dispatch table maintained by the loader. This dispatch table contains pointers to the Vulkan functions appropriate to that object. There are two types of dispatch tables the loader maintains, Instance and Device. I.e. a VkInstance object’s dispatch table will point to Vulkan functions such as vkEnumeratePhysicalDevices, vkDestroyInstance, vkCreateInstance, etc. Instance functions take a VkInstance or VkPhysicalDevice as their first argument.

Device objects have a separate dispatch table containing the appropriate function pointers. The device dispatch table is used for all functions that take a VkDevice, VkQueue or VkCommandBuffer as their first argument.

These instance and device dispatch tables are constructed when the application calls vkCreateInstance and vkCreateDevice. At that time the application and/or system can specify optional layers to be included. The loader will initialize the specified layers to create a call chain for each Vulkan function and each entry of the dispatch table will point to the first element of that chain. Thus, the loader builds an instance call chain for each VkInstance that is created and a device call chain for each VkDevice that is created.

For example, the diagram below represents what happens in the call chain for vkCreateInstance. After initializing the chain, the loader will call into the first layer’s vkCreateInstance which will call the next finally terminating in the loader again where this function calls every ICD’s vkCreateInstance and saves the results. This allows every enabled layer for this chain to set up what it needs based on the VkInstanceCreateInfo structure from the application.

This also highlights some of the complexity the loader must manage when using instance chains. As shown here, the loader must aggregate information from multiple devices when they are present. This means that the loader has to know about instance level extensions to aggregate them correctly.

Device chains are created at vkCreateDevice and are generally simpler because they deal with only a single device and the ICD can always be the terminator of the chain. The below diagram also illustrates how layers (either device or instance) can skip intercepting any given Vulkan entry point.

Application interface to loader

In this section we’ll discuss how an application interacts with the loader.

Linking to loader library for core and WSI extension symbols.
Dynamic Vulkan command lookup & application dispatch table.
Loader library filenames for linking to different Vulkan ABI versions.
Layers
Extensions
vkGetInstanceProcAddr, vkGetDeviceProcAddr

The loader library on Windows, Linux and Android will export all core Vulkan and all appropriate Window System Interface (WSI) extensions. This is done to make it simpler to get started with Vulkan development. When an application links directly to the loader library in this way, the Vulkan calls are simple trampoline functions that jump to the appropriate dispatch table entry for the object they are given.

Applications are not required to link directly to the loader library, instead they can use the appropriate platform specific dynamic symbol lookup on the loader library to initialize the application’s own dispatch table. This allows an application to fail gracefully if the loader cannot be found, and it provides the fastest mechanism for the application to call Vulkan functions. An application will only need to query (via system calls such as dlsym()) the address of vkGetInstanceProcAddr from the loader library. Using vkGetInstanceProcAddr the application can then discover the address of all instance and global functions and extensions, such as vkCreateInstance, vkEnumerateInstanceExtensionProperties and vkEnumerateInstanceLayerProperties in a platform independent way.

The Vulkan loader library will be distributed in various ways including Vulkan SDKs, OS package distributions and IHV driver packages. These details are beyond the scope of this document. However, the name and versioning of the Vulkan loader library is specified so an app can link to the correct Vulkan ABI library version. Vulkan versioning is such that ABI backwards compatibility is guaranteed for all versions with the same major number (e.g. 1.0 and 1.1). On Windows, the loader library encodes the ABI version in its name such that multiple ABI incompatible versions of the loader can peacefully coexist on a given system. The Vulkan loader library file name is “vulkan-<ABI version>.dll”. For example, for Vulkan version 1.X on Windows the library filename is vulkan-1.dll. And this library file can typically be found in the windows/system32 directory.

For Linux, shared libraries are versioned based on a suffix. Thus, the ABI number is not encoded in the base of the library filename as on Windows. On Linux an application wanting to link to the latest Vulkan ABI version would just link to the name vulkan (libvulkan.so). A specific Vulkan ABI version can also be linked to by applications (e.g. libvulkan.so.1).

Applications desiring Vulkan functionality beyond what the core API offers may use various layers or extensions. A layer cannot add new or modify existing Vulkan commands, but may offer extensions that do. A common use of layers is for API validation. A developer can use validation layers during application development, but during production the layers can be disabled by the application. Thus, eliminating the overhead of validating the application's usage of the API. Layers discovered by the loader are reported to the application via vkEnumerateInstanceLayerProperties. Layers are enabled at vkCreateInstance and are active for all Vulkan commands that using the given VkIstance and any of it's child objects. For example, the ppEnabledLayerNames array in the VkInstanceCreateInfo structure is used by the application to list the layer names to be enabled at vkCreateInstance. At vkCreateInstance and vkCreateDevice, the loader will construct call chains that include the application specified (enabled) layers. vkCreateDevice will use the layers specified at vkCreateInstance. vkEnumerateDeviceLayerProperties and device layers are deprecated. Order is important in the ppEnabledLayerNames array; array element 0 is the topmost (closest to the application) layer inserted in the chain and the last array element is closest to the driver.

Developers may want to enable layers that are not enabled by the given application they are using. On Linux and Windows, the environment variable “VK_INSTANCE_LAYERS” can be used to enable additional layers which are not specified (enabled) by the application at vkCreateInstance. VK_INSTANCE_LAYERS is a colon (Linux)/semi-colon (Windows) separated list of layer names to enable. Order is relevant with the first layer in the list being the topmost layer (closest to the application) and the last layer in the list being the bottommost layer (closest to the driver).

Application specified layers and user specified layers (via environment variables) are aggregated and duplicates removed by the loader when enabling layers. Layers specified via environment variable are topmost (closest to the application) while layers specified by the application are bottommost.

An example of using these environment variables to activate the validation layer VK_LAYER_LUNARG_parameter_validation on Windows or Linux is as follows:

> $ export VK_INSTANCE_LAYERS=VK_LAYER_LUNARG_parameter_validation

Some platforms, including Linux and Windows, support layers which are enabled automatically by the loader rather than explicitly by the application (or via environment variable). Explicit layers are those layers enabled by the application (or environment variable) by providing the layer name. Implicit layers are those layers enabled by the loader automatically. Any implicit layers the loader discovers on the system in the appropriate location will be enabled (subject to environment variable overrides described later). Discovery of properly installed implicit and explicit layers is described later. Explicitly enabling a layer that is implicitly enabled has no additional effect: the layer will still be enabled implicitly by the loader.

Extensions are optional functionality provided by a layer, the loader or an ICD. Extensions can modify the behavior of the Vulkan API and need to be specified and registered with Khronos.

Instance extensions can be discovered via vkEnumerateInstanceExtensionProperties. Device extensions can be discovered via vkEnumerateDeviceExtensionProperties. The loader discovers and aggregates all extensions from layers (both explicit and implicit), ICDs and the loader before reporting them to the application in vkEnumerate*ExtensionProperties. The pLayerName parameter in these functions is used to select either a single layer or the Vulkan platform implementation. If pLayerName is NULL, extensions from Vulkan implementation components (including loader, implicit layers, and ICDs) are enumerated. If pLayerName is equal to a discovered layer module name then any extensions from that layer (which may be implicit or explicit) are enumerated. Duplicate extensions (e.g. an implicit layer and ICD might report support for the same extension) are eliminated by the loader. For duplicates, the ICD version is reported and the layer version is culled. Extensions must be enabled (in vkCreateInstance or vkCreateDevice) before they can be used.

Extension command entry points should be queried via vkGetInstanceProcAddr or vkGetDeviceProcAddr. vkGetDeviceProcAddr can only be used to query for device extension or core device entry points. Device entry points include any command that uses a VkDevice as the first parameter or a dispatchable object that is a child of a VkDevice (currently this includes VkQueue and VkCommandBuffer). vkGetInstanceProcAddr can be used to query either device or instance extension entry points in addition to all core entry points.

VkGetDeviceProcAddr is particularly interesting because it will provide the most efficient way to call into the ICD. For example, the diagram below shows what could happen if the application were to use vkGetDeviceProcAddr for the function “vkGetDeviceQueue” and “vkDestroyDevice” but not “vkAllocateMemory”. The resulting function pointer (fpGetDeviceQueue) would be the ICD’s entry point if the loader and any enabled layers do not need to see that call. Even if an enabled layer intercepts the call (e.g. vkDestroyDevice) the loader trampoline code is skipped for function pointers obtained via vkGetDeviceProcAddr. This also means that function pointers obtained via vkGetDeviceProcAddr will only work with the specific VkDevice it was created for, using it with another device has undefined results. For extensions, Get*ProcAddr will often be the only way to access extension API features.

Vulkan Installable Client Driver interface with the loader

ICD discovery

Vulkan allows multiple drivers each with one or more devices (represented by a Vulkan VkPhysicalDevice object) to be used collectively. The loader is responsible for discovering available Vulkan ICDs on the system. Given a list of available ICDs, the loader can enumerate all the physical devices available for an application and return this information to the application. The process in which the loader discovers the available Installable Client Drivers (ICDs) on a system is platform dependent. Windows, Linux and Android ICD discovery details are listed below.

Windows

Properly-Installed ICDs

In order to find properly-installed ICDs, the Vulkan loader will scan the values in the following Windows registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Khronos\Vulkan\Drivers

For each value in this key which has DWORD data set to 0, the loader opens the JSON format text information file (a.k.a. "manifest file") specified by the name of the value. Each name must be a full pathname to the text manifest file. The Vulkan loader will open each manifest file to obtain the name or pathname of an ICD shared library (".dll") file. For example:

 {"file_format_version": "1.0.0","ICD": {"library_path": "path to ICD library","api_version": "1.0.5"}}

The "library_path" specifies either a filename, a relative pathname, or a full pathname to an ICD shared library file, which the loader will attempt to load using LoadLibrary(). If the ICD is specified via a filename, the shared library lives in the system's DLL search path (e.g. in the "C:\Windows\System32" folder). If the ICD is specified via a relative pathname, it is relative to the path of the manifest file. Relative pathnames are those that do not start with a drive specifier (e.g. "C:"), nor with a directory separator (i.e. the '\' character), but do contain at least one directory separator.

The "file_format_version" specifies a major.minor.patch version number in case the format of the text information file changes in the future. If the same ICD shared library supports multiple, incompatible versions of text manifest file format versions, it must have multiple text info files (all of which may point to the same shared library).

The “api_version” specifies the major.minor.patch version number of the Vulkan API that the shared library (referenced by "library_path") was built with.

There are no rules about the name of the text information files (except the .json suffix).

There are no rules about the name of the ICD shared library files. For example, if the registry contains the following values,

[HKEY_LOCAL_MACHINE\SOFTWARE\Khronos\Vulkan\Drivers\]"C:\vendor a\vk_vendora.json"=dword:00000000"C:\windows\system32\vendorb_vk.json"=dword:00000000"C:\windows\system32\vendorc_icd.json"=dword:00000000

then the loader will open the following text information files, with the specified contents:

Text File Name	Text File Contents
vk_vendora.json	"ICD": { "library_path": "C:\VENDOR A\vk_vendora.dll", "api_version": "1.0.5" }
vendorb_vk.json	"ICD": { "library_path": "vendorb_vk.dll", "api_version": "1.0.5" }
vendorc_icd.json	"ICD": { "library_path": "vedorc_icd.dll", "api_version": "1.0.5" }

Then the loader will open the three files mentioned in the "Text File Contents" column, and then try to load and use the three shared libraries indicated by the ICD.library_path value.

Using Pre-Production ICDs

IHV developers (and sometimes other developers) need to use special, pre-production ICDs. In some cases, a pre-production ICD may be in an installable package. In other cases, a pre-production ICD may simply be a shared library in the developer's build tree. In this latter case, we want to allow developers to point to such an ICD without modifying the properly-installed ICD(s) on their system.

This need is met with the use of the "VK_ICD_FILENAMES" environment variable, which will override the mechanism used for finding properly-installed ICDs. In other words, only the ICDs listed in "VK_ICD_FILENAMES" will be used. The "VK_ICD_FILENAMES" environment variable is a semi-colon-separated list of ICD text information files (aka manifest files), containing the following:

A full pathname (e.g. "C:\my_build\my_icd.json")

Typically, "VK_ICD_FILENAMES" will only contain a full pathname to one info file for a developer-built ICD. A semi-colon is only used if more than one ICD is listed.

For example, if a developer wants to refer to one ICD that they built, they could set the "VK_ICD_FILENAMES" environment variable to:

C:\my_build\my_icd.json

If a developer wants to refer to two ICDs, one of which is a properly-installed ICD, they can use the full pathname of the text file:

C:\Windows\System32\vendorc_icd.json;C:\my_build\my_icd.json

Notice the semi-colon between "C:\Windows\System32\vendorc_icd.json" and "C:\my_build\my_icd.json".

Linux

P properly-Installed ICDs

In order to find properly-installed ICDs, the Vulkan loader will scan the files in the following Linux directories:

/usr/share/vulkan/icd.d /etc/vulkan/icd.d $HOME/.local/share/vulkan/icd.d

Where $HOME is the current home directory of the application's user id; this path will be ignored for suid programs.

These directories will contain text information files (a.k.a. "manifest files"), that use a JSON format.

The Vulkan loader will open each manifest file found to obtain the name or pathname of an ICD shared library (".so") file. For example:

{"file_format_version": "1.0.0","ICD": {"library_path": "path to ICD library","api_version": "1.0.5"}
}

The "library_path" specifies either a filename, a relative pathname, or a full pathname to an ICD shared library file. If the ICD is specified via a filename, the loader will attempt to open that file as a shared object using dlopen(), and the file must be in a directory that dlopen is configured to look in (Note: various distributions are configured differently). A distribution is free to create Vulkan-specific system directories (e.g. ".../vulkan/icd"), but is not required to do so. If the ICD is specified via a relative pathname, it is relative to the path of the info file. Relative pathnames are those that do not start with, but do contain at least one directory separator (i.e. the '/' character). For example, "lib/vendora.so" and "./vendora.so" are examples of relative pathnames.

The "file_format_version" provides a major.minor.patch version number in case the format of the manifest file changes in the future. If the same ICD shared library supports multiple, incompatible versions of manifest file format versions, it must have multiple manifest files (all of which may point to the same shared library).

The “api_version” specifies the major.minor.patch version number of the Vulkan API that the shared library (referenced by "library_path") was built with.

The "/usr/share/vulkan/icd.d" directory is for ICDs that are installed from Linux-distribution-provided packages. The "/etc/vulkan/icd.d" directory is for ICDs that are installed from non-Linux-distribution-provided packages.

There are no rules about the name of the text files (except the .json suffix).

There are no rules about the name of the ICD shared library files. For example, if the "/usr/share/vulkan/icd.d" directory contain the following files, with the specified contents:

Text File Name	Text File Contents
vk_vendora.json	"ICD": { "library_path": "vendora.so", "api_version": "1.0.5" }
vendorb_vk.json	"ICD": { "library_path": "vendorb_vulkan_icd.so", "api_version": "1.0.5" }
vendorc_icd.json	"ICD": { "library_path": "/usr/lib/VENDORC/icd.so", "api_version": "1.0.5" }

then the loader will open the three files mentioned in the "Text File Contents" column, and then try to load and use the three shared libraries indicated by the ICD.library_path value.

Using Pre-Production ICDs

The "VK_ICD_FILENAMES" environment variable is a colon-separated list of ICD manifest files, containing the following:

A filename (e.g. "libvkicd.json") in the "/usr/share/vulkan/icd.d", "/etc/vulkan/icd.d" "$HOME/.local/share/vulkan/icd.d" directories
A full pathname (e.g. "/my_build/my_icd.json")

Typically, "VK_ICD_FILENAMES" will only contain a full pathname to one info file for a developer-built ICD. A colon is only used if more than one ICD is listed.

For example, if a developer wants to refer to one ICD that they built, they could set the "VK_ICD_FILENAMES" environment variable to:

/my_build/my_icd.json

If a developer wants to refer to two ICDs, one of which is a properly-installed ICD, they can use the name of the text file in the system directory:

vendorc_vulkan.json:/my_build/my_icd.json

Notice the colon between "vendorc_vulkan.json" and "/my_build/my_icd.json".

NOTE: this environment variable will be ignored for suid programs.

Android

The Android loader lives in the system library folder. The location cannot be changed. The loader will load the driver/ICD via hw_get_module with the ID of "vulkan". Due to security policies in Android none of this can be modified under normal use.

I ICD interface requirements

Generally, for all Vulkan commands issued by an application, the loader can be viewed as a pass through. That is, the loader generally doesn’t modified the commands or their parameters, but simply calls the ICDs entry point for that command. There are specific additional interface requirements an ICD needs to comply with that are over and above any requirements from the Vulkan specification including WSI extension specification. These addtional requirements are versioned to allow flexibility in the future. These interface requirements will be set forth in the following sections: 1) describing which "loader-ICD" interface version is available, 2) detailing the most recent interface version; 3) the supported, older interface requirements will be described as differences from the most recent interface version.

Windows and Linux

V Version Negotiation Between Loader and ICDs

All ICDs (supporting interface version 2 or higher) must export the following function that is used for determination of the interface version that will be used. This entry point is not a part of the Vulkan API itself, only a private interface between the loader and ICDs.

VKAPI_ATTR VkResult VKAPI_CALL vk_icdNegotiateLoaderICDInterfaceVersion(uint32_t* pSupportedVersion);

This entry point reports the "loader-ICD" interface version supported by both the loader and the ICD. The loader informs the ICD of it's desired interface version (typically the latest) via the pSupportedVersion parameter. This call is the first call made by the loader into the ICD (prior to any calls to vk_icdGetInstanceProcAddr).

If a loader sees that an ICD does not export this symbol it knows that it's dealing with a legacy ICD supporting either interface version 0 or 1. Similarly, if an ICD sees a call to vk_icdGetInstanceProcAddr before a call to vk_icdGetLoaderICDInterfaceVersion then it knows that it's dealing with a legacy loader supporting version 0 or 1. Note if the loader calls vk_icdGetInstanceProcAddr first it supports version 1, otherwise the loader only supports version 0.

The pSupportedVersion parameter is both an input and output parameter. It is filled in by the loader before the call with the desired latest interface version supported by the loader.

If the ICD receiving the call no longer supports the interface version provided by the loader (due to deprecation) then it can report VK_ERROR_INCOMPATIBLE_DRIVER error, otherwise it sets the value pointed by pSupportedVersion to the latest interface version supported by both the ICD and the loader and returns VK_SUCCESS. The ICD should report VK_SUCCESS in case the loader provided interface version is newer than that supported by the ICD, as it's the loader's responsibility to determine whether it can support the older interface version supported by the ICD. The ICD should also report VK_SUCCESS in the case it's interface version is greater than the loader's, but return the loader's version. Thus, upon return of VK_SUCCESS the pSupportedVersion will contain the desired interface version to be used by the ICD.

If the loader receives back an interface version from the ICD that the loader no longer supports (due to deprecation) or it receives a VK_ERROR_INCOMPATIBLE_DRIVER error instead of VK_SUCCESS then the loader will treat the ICD as incompatible and will not load it for use. In this case the application will not see the ICDs vkPhysicalDevice during enumeration.

Loader Version 2 Interface Requirements

Version 2 interface has requirements in three areas: 1) ICD Vulkan entry point discovery, 2) KHR_surface related requirements in the WSI extensions, 3) Vulkan dispatchable object creation requirements.

I ICD Vulkan entry point discovery

All ICDs must export the following function that is used for discovery of ICD Vulkan entry points. This entry point is not a part of the Vulkan API itself, only a private interface between the loader and ICDs for version 1 and higher interfaces.

VKAPI_ATTR PFN_vkVoidFunction VKAPI_CALL vk_icdGetInstanceProcAddr(VkInstance instance, const char* pName);

This function has very similar semantics to the Vulkan command vkGetInstanceProcAddr. vk_icdGetInstanceProcAddr returns valid function pointers for all the global level and instance level Vulkan commands, and also for vkGetDeviceProcAddr. Global level commands are those which contain no dispatchable object as the first parameter, such as vkCreateInstance and vkEnumerateInstanceExtensionProperties. The ICD must support querying global level entry points by calling vk_icdGetInstanceProcAddr with a NULL VkInstance parameter. Instance level commands are those that have either VkInstance, or VkPhysicalDevice as the first parameter dispatchable object. Both core entry points and any instance extension entry points the ICD supports should be available via vk_icdGetInstanceProcAddr. Future Vulkan instance extensions may define and use new instance level dispatchable objects other than VkInstance and VkPhysicalDevice, in which case extension entry points using these newly defined dispatchable objects must be queryable via vk_icdGetInstanceProcAddr.

All other Vulkan entry points must either NOT be exported from the ICD library or else NOT use the official Vulkan function names if they are exported. This requirement is for ICD libraries that include other functionality (such as OpenGL library) and thus could be loaded by the application prior to when the Vulkan loader library is loaded by the application. In other words, the ICD library exported Vulkan symbols must not clash with the loader's exported Vulkan symbols.

Beware of interposing by dynamic OS library loaders if the official Vulkan names are used. On Linux, if official names are used, the ICD library must be linked with -Bsymbolic.

Handling KHR_surface objects in the WSI extensions

Normally, ICDs handle object creation and destruction for various Vulkan objects. The WSI surface extensions for Linux and Windows (VK_KHR_win32_surface, VK_KHR_xcb_surface, VK_KHR_xlib_surface, VK_KHR_mir_surface, VK_KHR_wayland_surface, and VK_KHR_surface) are handled differently. For these extensions, the VkSurfaceKHR object creation and destruction is handled by the loader as follows:

Loader handles the vkCreate*SurfaceKHR() and vkDestroySurfaceKHR() functions including creating/destroying the VkSurfaceKHR object.
VkSurfaceKHR objects have the underlying structure (VkIcdSurface*) as defined in include/vulkan/vk_icd.h.
ICDs can cast any VkSurfaceKHR object to a pointer to the appropriate VkIcdSurface* structure.
VkIcdSurface* structures include VkIcdSurfaceWin32, VkIcdSurfaceXcb, VkIcdSurfaceXlib, VkIcdSurfaceMir, and VkIcdSurfaceWayland. The first field in the structure is a VkIcdSurfaceBase enumerant that indicates whether the surface object is Win32, Xcb, Xlib, Mir, or Wayland.

I ICD dispatchable object creation

As previously covered, the loader requires dispatch tables to be accessible within Vulkan dispatchable objects, which include VkInstance, VkPhysicalDevice, VkDevice, VkQueue, and VkCommandBuffer. The specific requirements on all dispatchable objects created by ICDs are as follows:

All dispatchable objects created by an ICD can be cast to void **
The loader will replace the first entry with a pointer to the dispatch table which is owned by the loader. This implies three things for ICD drivers:

The ICD must return a pointer for the opaque dispatchable object handle.
This pointer points to a regular C structure with the first entry being a pointer. Note: for any C++ ICD's that implement VK objects directly as C++ classes. The C++ compiler may put a vtable at offset zero if your class is non-POD due to the use of a virtual function. In this case use a regular C structure (see below).
The loader checks for a magic value (ICD_LOADER_MAGIC) in all the created dispatchable objects, as follows (see include/vulkan/vk_icd.h):


#include "vk_icd.h"union _VK_LOADER_DATA {uintptr loadermagic;void *loaderData;
} VK_LOADER_DATA;vkObj alloc_icd_obj()
{vkObj *newObj = alloc_obj();...// Initialize pointer to loader's dispatch table with ICD_LOADER_MAGICset_loader_magic_value(newObj);...return newObj;
}

Loader Version 0 and 1 Interface Differences

Version 0 and 1 interfaces do not support version negotiation via vk_icdNegotiateLoaderICDInterfaceVersion. ICDs can distinguish version 0 and version 1 interfaces as follows: if the loader calls vk_icdGetInstanceProcAddr first it supports version 1, otherwise the loader only supports version 0.

Version 0 interface does not support vk_icdGetInstanceProcAddr. Version 0 interface requirements for obtaining ICD Vulkan entry points are as follows:

vkGetInstanceProcAddr exported in the ICD library and returns valid function pointers for all the Vulkan API entry points;
vkCreateInstance exported in the ICD library;
vkEnumerateInstanceExtensionProperties exported in the ICD library;

Additional Notes:

The loader will filter out extensions requested in vkCreateInstance and vkCreateDevice before calling into the ICD; Filtering will be of extensions advertised by entities (e.g. layers) different from the ICD in question.
The loader will not call the ICD for vkEnumerate*LayerProperties() as layer properties are obtained from the layer libraries and layer JSON files.
If an ICD library wants to implement a layer it can do so by having the appropriate layer JSON manifest file refer to the ICD library file.
The loader will not call the ICD for vkEnumerate*ExtensionProperties(pLayerName != NULL).
ICDs creating new dispatchable objects via device extensions need to initialize the created dispatchable object. The loader has generic trampoline code for unknown device extensions. This generic trampoline code doesn't initialize the dispatch table within the newly created object. See the section for more information on how to initialize created dispatchable objects for extensions non known by the loader.layer link

Android

The Android loader uses the same protocol for initializing the dispatch table as described above. The only difference is that the Android loader queries layer and extension information directly from the respective libraries and does not use the json manifest files used by the Windows and Linux loaders.

Vulkan layer interface with the loader

Layer discovery

Windows

Properly-Installed Layers

In order to find properly-installed layers, the Vulkan loader will use a similar mechanism as used for ICDs. Text information files (aka manifest files), that use a JSON format, are read in order to identify the names and attributes of layers and their extensions. The use of manifest files allows the loader to avoid loading any shared library files when the application does not query nor request any extensions. Layers and extensions have additional complexity, and so their manifest files contain more information than ICD info files. For example, a layer shared library file may contain multiple layers/extensions (perhaps even an ICD).

In order to find properly-installed layers, the Vulkan loader will scan the values in the following Windows registry keys:

HKEY_LOCAL_MACHINE\SOFTWARE\Khronos\Vulkan\ExplicitLayers

HKEY_LOCAL_MACHINE\SOFTWARE\Khronos\Vulkan\ImplicitLayers

Explicit layers are those which are enabled by an application (e.g. with the vkCreateInstance function), or by an environment variable (as mentioned previously).

Implicit layers are those which are enabled by their existence. For example, certain application environments (e.g. Steam or an automotive infotainment system) may have layers which they always want enabled for all applications that they start. Other implicit layers may be for all applications started on a given system (e.g. layers that overlay frames-per-second). Implicit layers are enabled automatically, whereas explicit layers must be enabled explicitly. What distinguishes a layer as implicit or explicit is by which registry key its layer information file is referenced by.

For each value in these keys which has DWORD data set to 0, the loader opens the JSON manifest file specified by the name of the value. Each name must be a full pathname to the manifest file.

The Vulkan loader will open each info file to obtain information about the layer, including the name or pathname of a shared library (".dll") file.

This manifest file is in the JSON format and contains the following information:

(required) "file_format_version" - same as for ICDs, except that the format version can vary independently for ICDs and layers.
(required) "name" - layer name
(required and deprecated) "type" - which layer chains should the layer be activated on. Distinct instance and device layers are deprecated; there are now just layers. Allowable values for type (both before and after deprecation) are "INSTANCE", "GLOBAL" and, "DEVICE." "DEVICE" layers are skipped over by the loader as if they were not found. Thus, layers must have a type of "GLOBAL" or "INSTANCE" for the loader to include the layer in it's discovery.
(required) "library_path" - filename / full path / relative path to the library file
(required) "api_version" - same as for ICDs.
(required) "implementation_version" - layer version, a single number increasing with backward compatible changes.
(required) "description" - informative description of the layer.
(optional) "device_extensions" or "instance_extensions" - array of extension information as follows
- (required) extension "name" - Vulkan registered name
- (required) extension "spec_version" - extension specification version, a single number, increasing with backward compatible changes.
- (required for device_extensions with entry points) extension "entrypoints" - array of device extension entry points; not used for instance extensions
(sometimes required) "functions" - mapping list of function entry points. If multiple layers exist within the same shared library (or if a layer is in the same shared library as an ICD), this must be specified to allow each layer to have its own vkGet*ProcAddr entry points that can be found by the loader. At this time, only the following two functions are required:
- "vkGetInstanceProcAddr" name
- "vkGetDeviceProcAddr" name
(optional for implicit layers) "enable_environment" requirement(s) - environment variable and value required to enable an implicit layer. This environment variable (which should vary with each "version" of the layer, as in "ENABLE_LAYER_FOO_1") must be set to the given value or else the implicit layer is not loaded. This is for application environments (e.g. Steam) which want to enable a layer(s) only for applications that they launch, and allows for applications run outside of an application environment to not get that implicit layer(s).
(required for implicit layers) "disable_environment" requirement(s) - environment variable and value required to disable an implicit layer. Note: in rare cases of an application not working with an implicit layer, the application can set this environment variable (before calling Vulkan commands) in order to "blacklist" the layer. This environment variable (which should vary with each "version" of the layer, as in "DISABLE_LAYER_FOO_1") must be set (not particularly to any value). If both the "enable_environment" and "disable_environment" variables are set, the implicit layer is disabled.

For example:

{
"file_format_version" : "1.0.0",
"layer": {"name": "VK_LAYER_LUNARG_overlay","type": "INSTANCE","library_path": "vkOverlayLayer.dll""api_version" : "1.0.5","implementation_version" : "2","description" : "LunarG HUD layer","functions": {"vkGetInstanceProcAddr": "OverlayLayer_GetInstanceProcAddr","vkGetDeviceProcAddr": "OverlayLayer_GetDeviceProcAddr"},"instance_extensions": [{"name": "VK_debug_report_EXT","spec_version": "1"},{"name": "VK_VENDOR_DEBUG_X","spec_version": "3"}],"device_extensions": [{"name": "VK_DEBUG_MARKER_EXT","spec_version": "1","entrypoints": ["vkCmdDbgMarkerBegin", "vkCmdDbgMarkerEnd"]}],"disable_environment": {"DISABLE_LAYER_OVERLAY_1": ""}
}
}

The "library_path" specifies either a filename, a relative pathname, or a full pathname to a layer shared library (".dll") file, which the loader will attempt to load using LoadLibrary(). If the layer is specified via a relative pathname, it is relative to the path of the info file (e.g. for cases when an application provides a layer that is in the same folder hierarchy as the rest of the application files). If the layer is specified via a filename, the shared library lives in the system's DLL search path (e.g. in the "C:\Windows\System32" folder).

There are no rules about the name of the text files (except the .json suffix).

There are no rules about the name of the layer shared library files.

Using Pre-Production Layers

As with ICDs, developers may need to use special, pre-production layers, without modifying the properly-installed layers. This need is met with the use of the "VK_LAYER_PATH" environment variable, which will override the mechanism using for finding properly-installed layers. Because many layers may exist on a system, this environment variable is a semi-colon-separated list of folders that contain layer info files. Only the folder listed in "VK_LAYER_PATH" will be scanned for info files. Each semi-colon-separated entry is:

The full pathname of a folder containing layer info files

Linux

Properly-Installed Layers

In order to find properly-installed layers, the Vulkan loader will use a similar mechanism as used for ICDs. Text information files, that use a JSON format, are read in order to identify the names and attributes of layers and their extensions. The use of text info files allows the loader to avoid loading any shared library files when the application does not query nor request any extensions. Layers and extensions have additional complexity, and so their info files contain more information than ICD info files. For example, a layer shared library file may contain multiple layers/extensions (perhaps even an ICD).

The Vulkan loader will scan the files in the following Linux directories:

/usr/share/vulkan/explicit_layer.d /usr/share/vulkan/implicit_layer.d /etc/vulkan/explicit_layer.d /etc/vulkan/implicit_layer.d \$HOME/.local/share/vulkan/explicit_layer.d \$HOME/.local/share/vulkan/implicit_layer.d

Where $HOME is the current home directory of the application's user id; this path will be ignored for suid programs.

Explicit layers are those which are enabled by an application (e.g. with the vkCreateInstance function), or by an environment variable (as mentioned previously). Implicit layers are those which are enabled by their existence. For example, certain application environments (e.g. Steam or an automotive infotainment system) may have layers which they always want enabled for all applications that they start. Other implicit layers may be for all applications started on a given system (e.g. layers that overlay frames-per-second). Implicit layers are enabled automatically, whereas explicit layers must be enabled explicitly. What distinguishes a layer as implicit or explicit is by which directory its layer information file exists in.

The "/usr/share/vulkan/*_layer.d" directories are for layers that are installed from Linux-distribution-provided packages. The "/etc/vulkan/*_layer.d" directories are for layers that are installed from non-Linux-distribution-provided packages.

The information file is in the JSON format and contains the following information:

(required) "file_format_version" – same as for ICDs, except that the format version can vary independently for ICDs and layers.
(required) "name" - layer name
(required and deprecated) "type" - which layer chains should the layer be activated on. Distinct instance and device layers are deprecated; there are now just layers. Allowable values for type (both before and after deprecation) are "INSTANCE", "GLOBAL" and, "DEVICE." "DEVICE" layers are skipped over by the loader as if they were not found. Thus, layers must have a type of "GLOBAL" or "INSTANCE" for the loader to include the layer in it's discovery.
(required) "library_path" - filename / full path / relative path to the text file
(required) "api_version" – same as for ICDs.
(required) "implementation_version" – layer version, a single number increasing with backward compatible changes.
(required) "description" – informative description of the layer.
(optional) "device_extensions" or "instance_extensions" - array of extension information as follows
- (required) extension "name" - Vulkan registered name
- (required) extension "spec_version" - extension specification version, a single number, increasing with backward compatible changes.
- (required for device extensions with entry points) extension "entrypoints" - array of device extension entry points; not used for instance extensions
(sometimes required) "functions" - mapping list of function entry points. If multiple layers exist within the same shared library (or if a layer is in the same shared library as an ICD), this must be specified to allow each layer to have its own vkGet*ProcAddr entry points that can be found by the loader. At this time, only the following two functions are required:
- "vkGetInstanceProcAddr" name
- "vkGetDeviceProcAddr" name
(optional for implicit layers) "enable_environment" requirement(s) - environment variable and value required to enable an implicit layer. This environment variable (which should vary with each "version" of the layer, as in "ENABLE_LAYER_FOO_1") must be set to the given value or else the implicit layer is not loaded. This is for application environments (e.g. Steam) which want to enable a layer(s) only for applications that they launch, and allows for applications run outside of an application environment to not get that implicit layer(s).
(required for implicit layers) "disable_environment" requirement(s) - environment variable and value required to disable an implicit layer. Note: in rare cases of an application not working with an implicit layer, the application can set this environment variable (before calling Vulkan commands) in order to "blacklist" the layer. This environment variable (which should vary with each "version" of the layer, as in "DISABLE_LAYER_FOO_1") must be set (not particularly to any value). If both the "enable_environment" and "disable_environment" variables are set, the implicit layer is disabled.

For example:

{
"file_format_version" : "1.0.0",
"layer": {"name": "VK_LAYER_LUNARG_overlay","type": "INSTANCE","library_path": "vkOverlayLayer.dll""api_version" : "1.0.5","implementation_version" : "2","description" : "LunarG HUD layer","functions": {"vkGetInstanceProcAddr": "OverlayLayer_GetInstanceProcAddr","vkGetDeviceProcAddr": "OverlayLayer_GetDeviceProcAddr"},"instance_extensions": [{"name": "VK_debug_report_EXT","spec_version": "1"},{"name": "VK_VENDOR_DEBUG_X","spec_version": "3"}],"device_extensions": [{"name": "VK_DEBUG_MARKER_EXT","spec_version": "1","entrypoints": ["vkCmdDbgMarkerBegin", "vkCmdDbgMarkerEnd"]}],"disable_environment": {"DISABLE_LAYER_OVERLAY_1": ""}
}
}

The "library_path" specifies either a filename, a relative pathname, or a full pathname to a layer shared library (".so") file, which the loader will attempt to load using dlopen(). If the layer is specified via a filename, the loader will attempt to open that file as a shared object using dlopen(), and the file must be in a directory that dlopen is configured to look in (Note: various distributions are configured differently). A distribution is free to create Vulkan-specific system directories (e.g. ".../vulkan/layers"), but is not required to do so. If the layer is specified via a relative pathname, it is relative to the path of the info file (e.g. for cases when an application provides a layer that is in the same directory hierarchy as the rest of the application files).

There are no rules about the name of the text files (except the .json suffix).

There are no rules about the name of the layer shared library files.

Using Pre-Production Layers

As with ICDs, developers may need to use special, pre-production layers, without modifying the properly-installed layers. This need is met with the use of the "VK_LAYER_PATH" environment variable, which will override the mechanism using for finding properly-installed layers. Because many layers may exist on a system, this environment variable is a colon-separated list of directories that contain layer info files. Only the directories listed in "VK_LAYER_PATH" will be scanned for info files. Each colon-separated entry is:

The full pathname of a directory containing layer info files

NOTE: these environment variables will be ignored for suid programs.

Android

The recommended way to enable layers is for applications to programatically enable them. The layers are provided by the application and must live in the application's library folder. The application enables the layers at vkCreateInstance as any Vulkan application would. An application enabled for debug has more options. It can enumerate and enable layers located in /data/local/vulkan/debug.

Layer interface requirements

Architectural interface overview

There are two key architectural features that drive the loader to layer library interface: 1) separate and distinct instance and device call chains, and 2) distributed dispatch. First these architectural features will be described and then the detailed interface will be specified.

Call chains are the links of calls for a given Vulkan command from layer module to layer module with the loader and or the ICD being the bottom most command. Call chains are constructed at both the instance level and the device level by the loader with cooperation from the layer libraries. Instance call chains are constructed by the loader when layers are enabled at vkCreateInstance. Device call chains are constructed by the loader when layers are enabled, by the loader, at vkCreateDevice. A layer can intercept Vulkan instance commands, device commands or both. For a layer to intercept instance commands, it must participate in the instance call chain. For a layer to intercept device commands, it must participate in the device chain.

Normally, when a layer intercepts a given Vulkan command, it will call down the instance or device chain as needed. The loader and all layer libraries that participate in a call chain cooperate to ensure the correct sequencing of calls from one entity to the next. This group effort for call chain sequencing is hereinafter referred to as distributed dispatch. In distributed dispatch, since each layer is responsible for properly calling the next entity in the device or instance chain, a dispatch mechanism is required for all Vulkan commands a layer intercepts. For Vulkan commands that are not intercepted by a layer, or if the layer chooses to terminate a given Vulkan command by not calling down the chain, then no dispatch mechanism is needed for that particular Vulkan command. Only for those Vulkan commands, which may be a subset of all Vulkan commands, that a layer intercepts is a dispatching mechanism by the layer needed. The loader is responsible for dispatching all core and instance extension Vulkan commands to the first entity in the chain.

Instance level Vulkan commands are those that have the dispatchable objects VkInstance, or VkPhysicalDevice as the first parameter and also includes vkCreateInstance.

Device level Vulkan commands are those that use VkDevice, VkQueue or VkCommandBuffer as the first parameter and also include vkCreateDevice. Future extensions may introduce new instance or device level dispatchable objects, so the above lists may be extended in the future.

Layer Library Interface

A layer library is a container of layers. This section defines an extensible manifest file interface or programming interface to discover layers contained in layer libraries. The extensible programming interface is used on Android only. For Windows and Linux, the layer manifest JSON files are used.

It also specifies the minimal conventions and rules a layer must follow. Other sections might have other guidelines that layers should follow.

Layer Conventions and Rules

A layer, when inserted into an otherwise compliant Vulkan implementation, must still result in a compliant Vulkan implementation[*]. It must additionally follow some conventions and rules.

A layer is always chained with other layers. It must not make invalid calls to or rely on undefined behaviors of its lower layers. When it changes the behavior of a command, it must make sure its upper layers do not make invalid calls to or rely on undefined behaviors of its lower layers because of the changed behavior. For example, when a layer intercepts an object creation command to wrap the objects created by its lower layers, it must make sure its lower layers never see the wrapping objects, directly from itself or indirectly from its upper layers.

When a layer requires host memory, it may ignore the provided allocators. It should use memory allocators if the layer is intended to run in a production environment, such as an implicit layer that is always enabled. That will allow applications to include the layer's memory usage.

vkEnumerateInstanceLayerProperties must enumerate and only enumerate the layer itself.

vkEnumerateInstanceExtensionProperties must handle the case where pLayerName is itself. It must returnVK_ERROR_LAYER_NOT_PRESENT otherwise, including when pLayerName is NULL.

vkEnumerateDeviceLayerProperties is deprecated and may be omitted. The behavior is undefined.

vkEnumerateDeviceExtensionProperties must handle the case where pLayerName is itself. In other cases, it should normally chain to other layers.

vkCreateInstance must not generate an error for unrecognized layer names and extension names. It may assume the layer names and extension names have been validated.

vkGetInstanceProcAddr can intercept a command by returning a function pointer different from what would be returned through chaining.

vkGetDeviceProcAddr can intercept a command by returning a function pointer different from what would be returned through chaining.

[*]: The intention is for layers to have a well-defined baseline behavior. Some of the conventions or rules, for example, may be considered abuses of the specification.

Layer Library Interface Version 0 (Android)

A layer library supporting interface version 0 must define and export these introspection functions, unrelated to any Vulkan command despite the names, signatures, and other similarities:

vkEnumerateInstanceLayerProperties enumerates all layers in a layer library. This function never fails.

When a layer library contains only one layer, this function may be an alias to the layer'svkEnumerateInstanceLayerProperties.
vkEnumerateInstanceExtensionProperties enumerates instance extensions of layers in a layer library.pLayerName is always a valid layer name. This function never fails.

When a layer library contains only one layer, this function may be an alias to the layer'svkEnumerateInstanceExtensionProperties.
vkEnumerateDeviceLayerProperties enumerates a subset (can be full, proper, or empty subset) of layers in a layer library. physicalDevice is always VK_NULL_HANDLE. This function never fails.

If a layer is not enumerated by this function, it will not participate in device command interception.
vkEnumerateDeviceExtensionProperties enumerates device extensions of layers in a layer library.physicalDevice is always VK_NULL_HANDLE. pLayerName is always a valid layer name. This function never fails.

The introspection functions are not used by the desktop loader.

It must also define and export these functions:

<layerName>GetInstanceProcAddr behaves as if <layerName>'s vkGetInstanceProcAddr is called, except
- when pName is vkEnumerateInstanceLayerProperties, vkEnumerateInstanceExtensionProperties, orvkEnumerateDeviceLayerProperties (but not vkEnumerateDeviceExtensionProperties), it returns a function pointer to the corresponding introspection function defined by this interface.
- when pName is vkGetInstanceProcAddr, it returns a function pointer to itself.
For compatibility with older layer libraries,
- when pName is vkCreateDevice, it ignores instance.
- when pName is a device command defined by Vulkan 1.0 or VK_KHR_swapchain (but not other device commands), it may chain to other layers without intercepting. A loader should avoid querying such device commands.
When a layer library contains only one layer, this function may alternatively be namedvkGetInstanceProcAddr.
<layerName>GetDeviceProcAddr behaves as if <layerName>'s vkGetDeviceProcAddr is called.

When a layer library contains only one layer, this function may alternatively be namedvkGetDeviceProcAddr.

All contained layers must support vk_layer.h. They do not need to implement commands that are not queryable. They are recommended not to export any command.

Layer Library Interface Version 0 (Windows and Linux)

On Windows and Linux (desktop), the loader uses manifest files to discover layer libraries and layers. The desktop loader doesn't directly query the layer library except during chaining. On Android, the loader queries the layer libraries directly as outlined above.

The layer libraries and the manifest files must be kept in sync.

The following table associates the desktop JSON nodes with the Android layer library queries. It also indicates requirements.

Property	JSON node	Android library query	Notes
layers in library	layer	vkEnumerateInstanceLayerProperties	one node required for each layer in the library
layer name	name	vkEnumerateInstanceLayerProperties	one node is required
layer type	type	vkEnumerateInstanceLayerProperties	one node is required (deprecated)
library location	library_path	N/A	one node is required
vulkan spec version	api_version	vkEnumerateInstanceLayerProperties	one node is required
layer implementation version	api_version	vkEnumerateInstanceLayerProperties	one node is required
layer description	description	vkEnumerateInstanceLayerProperties	one node is required
chaining functions	functions	vkGet*ProcAddr	see Note 1
instance extensions	instance_extensions	vkEnumerateInstanceExtensionProperties	see Note 2
device extensions	device_extensions	vkEnumerateDeviceExtensionProperties	see Note 3

Note 1: The "functions" node is required if the layer is using alternative names for vkGetInstanceProcAddr or vkGetDeviceProcAddr. vkGetInstanceProcAddr and vkGetDeviceProcAddr are required for all layers. See further requirements below.

Note 2: One "instance_extensions" node with an array of 1 or more elements required if any instance extensions are supported by a layer, otherwise the node is optional. Each element of the array must have the nodes "name" and "spec_version" which correspond to VkExtensionProperties "extensionName" and "specVersion" respectively.

Note 3: One "device_extensions" node with an array of 1 or more elements required if any device extensions are supported by a layer, otherwise the node is optional. Each element of the array must have the nodes "name" and "spec_version" which correspond to VkExtensionProperties "extensionName" and "specVersion" respectively. Additionally, each element of the array of device extensions must have the node "entrypoints" if the device extension adds Vulkan API commands, otherwise this node is not required. The "entrypoint" node is an array of the names of all entrypoints added by the supported extension.

The manifest file nodes "file_format_version", "disable_environment", and "enable_environment" have no corresponding equivalent in the Vulkan API nor in the Android layer library interface.

"file_format_version" is used to indicate the valid JSON syntax of the file. As nodes are added or deleted which would change the parsing of this file, the file_format_version should change. This version is NOT the same as the interface version. The interface version is a superset of the "file_format_version" and includes the semantics of the nodes in the JSON file. For interface version 0 the file format version must be "1.0.0"

"disable_environment" (required) and "enable_evironment" (optional) are for implicit layers as previously described.

vkGetInstanceProcAddr requirements: -Irregardless of the name, this function must be implemented and exported in the library for all layers. -This function must return the local entry points for all instance level Vulkan commands it intercepts. At a minimum, this includes vkGetInstanceProcAddr and vkCreateInstance. Optionally, this function may return intercepted device level Vulkan commands. -Vulkan commands that a layer doesn't intercept must be passed to the next entity in the chain. That is, the next layer/ICD's GetInstanceProcAddr must be called. -Currently this function must be able to handle a VkInstance parameter equal to NULL for instance level commands it intercepts including vkCreateDevice.

VkGetDeviceProcAddr requirements: -Irregardless of the name, this function must be implemented and exported in the library for all layers. -This function must return the local entry points for all device level Vulkan commands it intercepts. At a minimum, this includes vkGetDeviceProcAddr and vkCreateDevice. -Vulkan commands that a layer doesn't intercept must be passed to the next entity in the chain. That is, the next layer/ICD's GetDeviceProcAddr must be called.

There are no requirements on the names of the intercepting functions a layer implements except those listed above for vkGetInstanceProcAddr and vkGetDeviceProcAddr. Layers do not need to implement commands that are not going to be intercepted.

All layers within a library must support vk_layer.h.

Layer intercept requirements

Layers intercept a Vulkan command by defining a C/C++ function with signature identical to the Vulkan API for that command.
A layer must intercept at least vkGetInstanceProcAddr and vkCreateInstance. Additionally, a layer would also intercept vkGetDeviceProcAddr and vkCreateDevice to participate in the device chain.
Other than the two vkGet*ProcAddr, all other functions intercepted by a layer need NOT be exported by the layer.
For any Vulkan command a layer intercepts which has a non-void return value, an appropriate value must be returned by the layer intercept function.
The layer intercept function must call down the chain to the corresponding Vulkan command in the next entity. Undefined results will occur if a layer doesn't propagate calls down the chain. The two exceptions to this requirement are vkGetInstanceProcAddr and vkGetDeviceProcAddr which only call down the chain for Vulkan commands that they do not intercept.
Layer intercept functions may insert extra calls to Vulkan commands in addition to the intercept. For example, a layer intercepting vkQueueSubmit may want to add a call to vkQueueWaitIdle after calling down the chain for vkQueueSubmit. Any additional calls inserted by a layer must be on the same chain. They should call down the chain.

Distributed dispatching requirements

For each entry point a layer intercepts, it must keep track of the entry point residing in the next entity in the chain it will call down into. In other words, the layer must have a list of pointers to functions of the appropriate type to call into the next entity. This can be implemented in various ways but for clarity will be referred to as a dispatch table.
A layer can use the VkLayerDispatchTable structure as a device dispatch table (see include/vulkan/vk_layer.h).
A layer can use the VkLayerInstanceDispatchTable structure as a instance dispatch table (see include/vulkan/vk_layer.h).
Layers vkGetInstanceProcAddr function uses the next entity's vkGetInstanceProcAddr to call down the chain for unknown (i.e. non-intercepted) functions.
Layers vkGetDeviceProcAddr function uses the next entity's vkGetDeviceProcAddr to call down the chain for unknown (i.e. non-intercepted) functions.

Layer dispatch initialization

A layer initializes its instance dispatch table within its vkCreateInstance function.
A layer initializes its device dispatch table within its vkCreateDevice function.
The loader passes a linked list of initialization structures to layers via the "pNext" field in the VkInstanceCreateInfo and VkDeviceCreateInfo structures for vkCreateInstance and VkCreateDevice respectively.
The head node in this linked list is of type VkLayerInstanceCreateInfo for instance and VkLayerDeviceCreateInfo for device. See file include/vulkan/vk_layer.h for details.
A VK_STRUCTURE_TYPE_LOADER_INSTANCE_CREATE_INFO is used by the loader for the "sType" field in VkLayerInstanceCreateInfo.
A VK_STRUCTURE_TYPE_LOADER_DEVICE_CREATE_INFO is used by the loader for the "sType" field in VkLayerDeviceCreateInfo.
The "function" field indicates how the union field "u" should be interpreted within VkLayer*CreateInfo. The loader will set the "function" field to VK_LAYER_LINK_INFO. This indicates "u" field should be VkLayerInstanceLink or VkLayerDeviceLink.
The VkLayerInstanceLink and VkLayerDeviceLink structures are the list nodes.
The VkLayerInstanceLink contains the next entity's vkGetInstanceProcAddr used by a layer.
The VkLayerDeviceLink contains the next entity's vkGetInstanceProcAddr and vkGetDeviceProcAddr used by a layer.
Given the above structures set up by the loader, layer must initialize their dispatch table as follows:
- Find the VkLayerInstanceCreateInfo/VkLayerDeviceCreateInfo structure in the VkInstanceCreateInfo/VkDeviceCreateInfo structure.
- Get the next entity's vkGet*ProcAddr from the "pLayerInfo" field.
- For CreateInstance get the next entity's vkCreateInstance by calling the "pfnNextGetInstanceProcAddr": pfnNextGetInstanceProcAddr(NULL, "vkCreateInstance").
- For CreateDevice get the next entity's vkCreateDevice by calling the "pfnNextGetInstanceProcAddr": pfnNextGetInstanceProcAddr(NULL, "vkCreateDevice").
- Advanced the linked list to the next node: pLayerInfo = pLayerInfo->pNext.
- Call down the chain either CreateDevice or CreateInstance
- Initialize your layer dispatch table by calling the next entity's Get*ProcAddr function once for each Vulkan command needed in your dispatch table

Example code for CreateInstance

VkResult vkCreateInstance(const VkInstanceCreateInfo *pCreateInfo,const VkAllocationCallbacks *pAllocator,VkInstance *pInstance)
{VkLayerInstanceCreateInfo *chain_info =get_chain_info(pCreateInfo, VK_LAYER_LINK_INFO);assert(chain_info->u.pLayerInfo);PFN_vkGetInstanceProcAddr fpGetInstanceProcAddr =chain_info->u.pLayerInfo->pfnNextGetInstanceProcAddr;PFN_vkCreateInstance fpCreateInstance =(PFN_vkCreateInstance)fpGetInstanceProcAddr(*pInstance, "vkCreateInstance");if (fpCreateInstance == NULL) {return VK_ERROR_INITIALIZATION_FAILED;}// Advance the link info for the next element of the chainchain_info->u.pLayerInfo = chain_info->u.pLayerInfo->pNext;// Continue call down the chainVkResult result = fpCreateInstance(pCreateInfo, pAllocator, pInstance);if (result != VK_SUCCESS)return result;// Init layer's dispatch table using GetInstanceProcAddr of// next layer in the chain.instance_dispatch_table = new VkLayerInstanceDispatchTable;layer_init_instance_dispatch_table(*pInstance, my_data->instance_dispatch_table, fpGetInstanceProcAddr);// Other layer initialization...return VK_SUCCESS;
}

Example code for CreateDevice

VkResult 
vkCreateDevice(VkPhysicalDevice gpu,const VkDeviceCreateInfo *pCreateInfo,const VkAllocationCallbacks *pAllocator,VkDevice *pDevice)
{VkLayerDeviceCreateInfo *chain_info =get_chain_info(pCreateInfo, VK_LAYER_LINK_INFO);PFN_vkGetInstanceProcAddr fpGetInstanceProcAddr =chain_info->u.pLayerInfo->pfnNextGetInstanceProcAddr;PFN_vkGetDeviceProcAddr fpGetDeviceProcAddr =chain_info->u.pLayerInfo->pfnNextGetDeviceProcAddr;PFN_vkCreateDevice fpCreateDevice =(PFN_vkCreateDevice)fpGetInstanceProcAddr(NULL, "vkCreateDevice");if (fpCreateDevice == NULL) {return VK_ERROR_INITIALIZATION_FAILED;}// Advance the link info for the next element on the chainchain_info->u.pLayerInfo = chain_info->u.pLayerInfo->pNext;VkResult result = fpCreateDevice(gpu, pCreateInfo, pAllocator, pDevice);if (result != VK_SUCCESS) {return result;}// initialize layer's dispatch tabledevice_dispatch_table = new VkLayerDispatchTable;layer_init_device_dispatch_table(*pDevice, device_dispatch_table, fpGetDeviceProcAddr);// Other layer initialization...return VK_SUCCESS;
}

Special Considerations

Associating private data with Vulkan objects within a layer

A layer may want to associate it's own private data with one or more Vulkan objects. Two common methods to do this are hash maps and object wrapping. The loader supports layers wrapping any Vulkan object including dispatchable objects. Layers which wrap objects should ensure they always unwrap objects before passing them down the chain. This implies the layer must intercept every Vulkan command which uses the object in question. Layers above the object wrapping layer will see the wrapped object. Layers which wrap dispatchable objects must ensure that the first field in the wrapping structure is a pointer to a dispatch table as defined in vk_layer.h. Specifically, an instance wrapped dispatchable object could be as follows:

struct my_wrapped_instance_obj_ {VkLayerInstanceDispatchTable *disp;// whatever data layer wants to add to this object
};

A device wrapped dispatchable object could be as follows:

struct my_wrapped_instance_obj_ {VkLayerDispatchTable *disp;// whatever data layer wants to add to this object
};

Alternatively, a layer may want to use a hash map to associate data with a given object. The key to the map could be the object. Alternatively, for dispatchable objects at a given level (eg device or instance) the layer may want data associated with the VkDevice or VkInstance objects. Since there are multiple dispatchable objects for a given VkInstance or VkDevice, the VkDevice or VkInstance object is not a great map key. Instead the layer should use the dispatch table pointer within the VkDevice or VkInstance since that will be unique for a given VkInstance or VkDevice.

Creating new dispatchable objects

Layers which create dispatchable objects take special care. Remember that loader trampoline code normally fills in the dispatch table pointer in the newly created object. Thus, the layer must fill in the dispatch table pointer if the loader trampoline will not do so. Common cases where a layer (or ICD) may create a dispatchable object without loader trampoline code is as follows:

object wrapping layers that wrap dispatchable objects
layers which add extensions that create dispatchable objects
layers which insert extra Vulkan commands in the stream of commands they intercept from the application
ICDs which add extensions that create dispatchable objects

The Windows/Linux loader provides a callback that can be used for initializing a dispatchable object. The callback is passed as an extension structure via the pNext field in VkInstanceCreateInfo and VkDeviceCreateInfo. The callback prototype is defined as follows for instance and device callbacks respectively (see vk_layer.h):

VKAPI_ATTR VkResult VKAPI_CALL vkSetInstanceLoaderData(VkInstance instance, void *object);
VKAPI_ATTR VkResult VKAPI_CALL vkSetDeviceLoaderData)(VkDevice device, void *object);

To obtain these callbacks the layer must search through the list of structures pointed to by the "pNext" field in the VkInstanceCreateInfo and VkDeviceCreateInfo parameters to find any callback structures inserted by the loader. The salient details are as follows:

For CreateInstance the callback structure pointed to by "pNext" is VkLayerInstanceCreateInfo as defined in vk_layer.h.
A "sType" field in of VK_STRUCTURE_TYPE_LOADER_INSTANCE_CREATE_INFO within VkInstanceCreateInfo parameter indicates a loader structure.
Within VkLayerInstanceCreateInfo, the "function" field indicates how the union field "u" should be interpreted.
A "function" equal to VK_LOADER_DATA_CALLBACK indicates the "u" field will contain the callback in "pfnSetInstanceLoaderData".
For CreateDevice the callback structure pointed to by "pNext" is VkLayerDeviceCreateInfo as defined in include/vulkan/vk_layer.h.
A "sType" field in of VK_STRUCTURE_TYPE_LOADER_DEVICE_CREATE_INFO within VkDeviceCreateInfo parameter indicates a loader structure.
Within VkLayerDeviceCreateInfo, the "function" field indicates how the union field "u" should be interpreted.
A "function" equal to VK_LOADER_DATA_CALLBACK indicates the "u" field will contain the callback in "pfnSetDeviceLoaderData".

Alternatively, if an older loader is being used that doesn't provide these callbacks, the layer may manually initialize the newly created dispatchable object. To fill in the dispatch table pointer in newly created dispatchable object, the layer should copy the dispatch pointer, which is always the first entry in the structure, from an existing parent object of the same level (instance versus device). For example, if there is a newly created VkCommandBuffer object, then the dispatch pointer from the VkDevice object, which is the parent of the VkCommandBuffer object, should be copied into the newly created object.