Android4.0 下调试华为 hw_mw269V2模块时, 出现以下串口信息, 是什么原因呢?
[ 6.530000] init: command 'insmod' r=0
[ 6.590000] [hw-mw269]: Set GPIO hw_mw269x_wl_enb to 1 !
[ 6.600000] [hw-mw269]: HW-MW269 is already on by bt
[ 6.600000] [hw-mw269]: HW-MW269 power state change: wifi 1, bt 1 !!
[ 6.610000] [mmc]: mmc 3 power on !!
[ 6.610000] [DHD]
[ 6.610000] Dongle Host Driver, version 5.90.125.69
[ 6.650000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 52, RTO !!
[ 6.650000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 52, RTO !!
[ 6.660000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 8, RTO !!
[ 6.670000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 5, RTO !!
[ 6.680000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 5, RTO !!
[ 6.690000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 5, RTO !!
[ 6.690000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 5, RTO !!
[ 6.700000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 55, RTO !!
[ 6.710000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 55, RTO !!
[ 6.720000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 55, RTO !!
[ 6.720000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 55, RTO !!
[ 6.730000] [mmc]: sdxc_request_done(L1114): smc 3 err, cmd 1, RTO !!
[ 6.740000] [mmc]: mmc 3 power off !!
[ 12.890000] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[ 15.780000] request_suspend_state: wakeup (3->0) at 15780255978 (2010-01-07 00:25:11.164676440 UTC)
[ 16.690000] acc_open
[ 16.690000] acc_release
[ 18.170000] netd used greatest stack depth: 5416 bytes left
[ 18.620000] [DHD] dhd_module_init: sdio_register_driver timeout
[ 18.620000] [hw-mw269]: Set GPIO hw_mw269x_wl_enb to 0 !
[ 18.630000] [hw-mw269]: HW-MW269 should stay on because of bt
------解决方案--------------------
SDIO 未起来. 如果配置未错的话, 可能是硬件问题.