<?php
/**
* upload.php
*
* Copyright 2013, Moxiecode Systems AB
* Released under GPL License.
*
* License: http://www.plupload.com/license
* Contributing: http://www.plupload.com/contributing
*/
#!! IMPORTANT:
#!! this file is just an example, it doesn't incorporate any security checks and
#!! is not recommended to be used in production environment as it is. Be sure to
#!! revise it and customize to your needs.
// Make sure file is not cached (as it happens for example on iOS devices)
header("Expires: Mon, 26 Jul 1997 05:00:00 GMT");
header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT");
header("Cache-Control: no-store, no-cache, must-revalidate");
header("Cache-Control: post-check=0, pre-check=0", false);
header("Pragma: no-cache");
// Support CORS
// header("Access-Control-Allow-Origin: *");
// other CORS headers if any...
if ($_SERVER['REQUEST_METHOD'] == 'OPTIONS') {
exit; // finish preflight CORS requests here
}
if ( !empty($_REQUEST[ 'debug' ]) ) {
$random = rand(0, intval($_REQUEST[ 'debug' ]) );
if ( $random === 0 ) {
header("HTTP/1.0 500 Internal Server Error");
exit;
}
}
// header("HTTP/1.0 500 Internal Server Error");
// exit;
// 5 minutes execution time
@set_time_limit(5 * 60);
// Uncomment this one to fake upload time
usleep(5000);
// Settings
// $targetDir = ini_get("upload_tmp_dir") . DIRECTORY_SEPARATOR . "plupload";
$targetDir = 'upload_tmp';
$uploadDir = 'upload';
$cleanupTargetDir = true; // Remove old files
$maxFileAge = 5 * 3600; // Temp file age in seconds
// Create target dir
if (!file_exists($targetDir)) {
@mkdir($targetDir);
}
// Create target dir
if (!file_exists($uploadDir)) {
@mkdir($uploadDir);
}
// Get a file name
if (isset($_REQUEST["name"])) {
$fileName = $_REQUEST["name"];
} elseif (!empty($_FILES)) {
$fileName = $_FILES["file"]["name"];
} else {
$fileName = uniqid("file_");
}
$md5File = @file('md5list.txt', FILE_IGNORE_NEW_LINES | FILE_SKIP_EMPTY_LINES);
$md5File = $md5File ? $md5File : array();
if (isset($_REQUEST["md5"]) && array_search($_REQUEST["md5"], $md5File ) !== FALSE ) {
die('{"jsonrpc" : "2.0", "result" : null, "id" : "id", "exist": 1}');
}
$filePath = $targetDir . DIRECTORY_SEPARATOR . $fileName;
$uploadPath = $uploadDir . DIRECTORY_SEPARATOR . $fileName;
// Chunking might be enabled
$chunk = isset($_REQUEST["chunk"]) ? intval($_REQUEST["chunk"]) : 0;
$chunks = isset($_REQUEST["chunks"]) ? intval($_REQUEST["chunks"]) : 1;
// Remove old temp files
if ($cleanupTargetDir) {
if (!is_dir($targetDir) || !$dir = opendir($targetDir)) {
die('{"jsonrpc" : "2.0", "error" : {"code": 100, "message": "Failed to open temp directory."}, "id" : "id"}');
}
while (($file = readdir($dir)) !== false) {
$tmpfilePath = $targetDir . DIRECTORY_SEPARATOR . $file;
// If temp file is current file proceed to the next
if ($tmpfilePath == "{$filePath}_{$chunk}.part" || $tmpfilePath == "{$filePath}_{$chunk}.parttmp") {
continue;
}
// Remove temp file if it is older than the max age and is not the current file
if (preg_match('/\.(part|parttmp)$/', $file) && (@filemtime($tmpfilePath) < time() - $maxFileAge)) {
@unlink($tmpfilePath);
}
}
closedir($dir);
}
// Open temp file
if (!$out = @fopen("{$filePath}_{$chunk}.parttmp", "wb")) {
die('{"jsonrpc" : "2.0", "error" : {"code": 102, "message": "Failed to open output stream."}, "id" : "id"}');
}
if (!empty($_FILES)) {
if ($_FILES["file"]["error"] || !is_uploaded_file($_FILES["file"]["tmp_name"])) {
die('{"jsonrpc" : "2.0", "error" : {"code": 103, "message": "Failed to move uploaded file."}, "id" : "id"}');
}
// Read binary input stream and append it to temp file
if (!$in = @fopen($_FILES["file"]["tmp_name"], "rb")) {
die('{"jsonrpc" : "2.0", "error" : {"code": 101, "message": "Failed to open input stream."}, "id" : "id"}');
}
} else {
if (!$in = @fopen("php://input", "rb")) {
die('{"jsonrpc" : "2.0", "error" : {"code": 101, "message": "Failed to open input stream."}, "id" : "id"}');
}
}
while ($buff = fread($in, 4096)) {
fwrite($out, $buff);
}
@fclose($out);
@fclose($in);
rename("{$filePath}_{$chunk}.parttmp", "{$filePath}_{$chunk}.part");
$index = 0;
$done = true;
for( $index = 0; $index < $chunks; $index++ ) {
if ( !file_exists("{$filePath}_{$index}.part") ) {
$done = false;
break;
}
}
if ( $done ) {
if (!$out = @fopen($uploadPath, "wb")) {
die('{"jsonrpc" : "2.0", "error" : {"code": 102, "message": "Failed to open output stream."}, "id" : "id"}');
}
if ( flock($out, LOCK_EX) ) {
for( $index = 0; $index < $chunks; $index++ ) {
if (!$in = @fopen("{$filePath}_{$index}.part", "rb")) {
break;
}
while ($buff = fread($in, 4096)) {
fwrite($out, $buff);
}
@fclose($in);
@unlink("{$filePath}_{$index}.part");
}
flock($out, LOCK_UN);
}
@fclose($out);
}
// Return Success JSON-RPC response
die('{"jsonrpc" : "2.0", "result" : null, "id" : "id"}');
------解决思路----------------------
1、直接用他的上传代码
2、直接根据需求写.NET上传代码
由于PHP和.NET在处理请求、响应的方法上多有不同，因此这里不存在翻译的概念，直接就是帮你写一个.NET的文件上传代码的事情，但是文件上传的后续处理方式比较多，需要自己确定，例如存放路径，命名规则，数据库的表结构（记录已经上传的文件），断点续传的处理等，这些在你的php代码里就没有的
------解决思路----------------------
这种翻译的工作比重新实现还麻烦
还要先看懂你原来的代码到底都干了些啥