在通常的Android大中型项目开发中，使用Eclipse进行android项目的开发有如下不便之处：
1、Android项目编译周期长，编译项目命令取消困难
2、在进行Android项目的编译的同时，Eclipse锁定工作区不能进行修改操作
3、在只进行资源文件的修改时，Eclipse对资源文件的修改会导致整个项目的编译，在无法打开自动编译模式下，极为不便
对项目进行分包处理后，android编译速度极慢。
对于我们现在的项目，在未进行分包时编译一次大约需要4、5分钟而有时候你只是简单的修改了一下java文件。。。
进行分包后，编译整个项目时长达到10分以上，有时甚至造成eclipse假死
严重的损耗了工作时间和降低工作效率。
?
对于一个android项目而言，其编译流程大致如下
?
?
??? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??
?
?
针对现在生成项目速度慢的状况，发现android 项目编译时对资源文件的操作占大量时间。
Eclipse默认编译流程会有两次aapt调用。每次时间约四分钟。
针对我们进行android项目开发时的经验，有以下几种情况：
1、频繁更改资源文件，在类中需要引用资源但不用生成apk
2、频繁修改java类文件，资源文件不变，需要生成apk
3、次数很少的同时修改资源文件和java类文件，同时生成apk
?
使用ant build 脚本实现将二次资源文件的操作分开，可以良好改善编译速度，提高工作效率（至少一半）。在ant脚本编译模式下，对于以上三种情况：
1、在只有资源文件更改的情况：使用命令 ant generateR 只更新R文件耗时 约4mins
2、在没有更新资源文件后，只修改JAVA类，使用 ant simpledebug 忽略资源文件R引用的更新，并打包? 耗时 约5mins
3、更新了资源文件，又修改了JAVA文件想立即打包则使用ant debug 此为Eclipse默认模式，时长大约10minus? -_-|
?
以下为ant?build优化，大家可以参考一下
?
<?xml version="1.0" encoding="UTF-8"?><project name="Reader" ><!-- The local.properties file is created and updated by the 'android' tool. It contains the path to the SDK. It should *NOT* be checked into Version Control Systems. --> <property file="local.properties" /> <!-- The build.properties file can be created by you and is never touched by the 'android' tool. This is the place to change some of the default property values used by the Ant rules. Here are some properties you may want to change/update: source.dir The name of the source directory. Default is 'src'. out.dir The name of the output directory. Default is 'bin'. Properties related to the SDK location or the project target should be updated using the 'android' tool with the 'update' action. This file is an integral part of the build system for your application and should be checked into Version Control Systems. --> <property file="build.properties" /> <!-- The default.properties file is created and updated by the 'android' tool, as well as ADT. This file is an integral part of the build system for your application and should be checked into Version Control Systems. --> <property file="default.properties" /> <!-- Custom Android task to deal with the project target, and import the proper rules. This requires ant 1.6.0 or above. --> <path id="android.antlibs"> <pathelement path="${sdk.dir}/tools/lib/anttasks.jar" /> <pathelement path="${sdk.dir}/tools/lib/sdklib.jar" /> <pathelement path="${sdk.dir}/tools/lib/androidprefs.jar" /> </path> <taskdef name="setup" classname="com.android.ant.SetupTask" classpathref="android.antlibs" /><!-- extension targets. Uncomment the ones where you want to do custom work in between standard targets --><!-- <target name="-pre-build"> </target> <target name="-pre-compile"> </target> [This is typically used for code obfuscation. Compiled code location: ${out.classes.absolute.dir} If this is not done in place, override ${out.dex.input.absolute.dir}] <target name="-post-compile"> </target>--> <!-- Execute the Android Setup task that will setup some properties specific to the target, and import the build rules files. The rules file is imported from <SDK>/platforms/<target_platform>/ant/ant_rules_r#.xml To customize existing targets, there are two options: - Customize only one target: - copy/paste the target into this file, *before* the <setup> task. - customize it to your needs. - Customize the whole script. - copy/paste the content of the rules files (minus the top node) into this file, *after* the <setup> task - disable the import of the rules by changing the setup task below to <setup import="false" />. - customize to your needs. --> <setup import="false"/> <!-- This rules file is meant to be imported by the custom Ant task: com.android.ant.SetupTask The following properties are put in place by the importing task: android.jar, android.aidl, aapt, aidl, and dx Additionnaly, the task sets up the following classpath reference: android.target.classpath This is used by the compiler task as the boot classpath. --> <!-- Custom tasks --> <taskdef name="aapt" classname="com.android.ant.AaptExecLoopTask" classpathref="android.antlibs" /> <taskdef name="aidl" classname="com.android.ant.AidlExecTask" classpathref="android.antlibs" /> <taskdef name="apkbuilder" classname="com.android.ant.ApkBuilderTask" classpathref="android.antlibs" /> <taskdef name="xpath" classname="com.android.ant.XPathTask" classpathref="android.antlibs" /> <taskdef name="if" classname="com.android.ant.IfElseTask" classpathref="android.antlibs" /> <taskdef name="nowtime" classname="AntNowTime" classpath="."/> <!-- Properties --> <!-- Tells adb which device to target. You can change this from the command line by invoking "ant -Dadb.device.arg=-d" for device "ant -Dadb.device.arg=-e" for the emulator. --> <property name="adb.device.arg" value="" /> <property name="android.tools.dir" location="${sdk.dir}/tools" /> <!-- Name of the application package extracted from manifest file --> <xpath input="AndroidManifest.xml" expression="[email protected]" output="manifest.package" /> <!-- Value of the debuggable attribute (Application node) extracted from manifest file --> <xpath input="AndroidManifest.xml" expression="[email protected]:debuggable" output="manifest.debuggable" default="false"/> <!-- Value of the debuggable attribute (Application node) extracted from manifest file --> <xpath input="AndroidManifest.xml" expression="[email protected]:hasCode" output="manifest.hasCode" default="true"/> <!-- Input directories --> <property name="source.dir" value="src" /> <property name="source.absolute.dir" location="${source.dir}" /> <property name="gen.dir" value="gen" /> <property name="gen.absolute.dir" location="${gen.dir}" /> <property name="resource.dir" value="res" /> <property name="resource.absolute.dir" location="${resource.dir}" /> <property name="asset.dir" value="assets" /> <property name="asset.absolute.dir" location="${asset.dir}" /> <!-- Directory for the third party java libraries --> <property name="external.libs.dir" value="${reader_libs}" /> <property name="external.libs.absolute.dir" location="${external.libs.dir}" /> <!-- Directory for the native libraries --> <property name="native.libs.dir" value="libs" /> <property name="native.libs.absolute.dir" location="${native.libs.dir}" /> <!-- Output directories --> <property name="out.dir" value="bin" /> <property name="out.absolute.dir" location="${out.dir}" /> <property name="out.classes.dir" value="${out.absolute.dir}" /> <property name="out.classes.absolute.dir" location="${out.classes.dir}" /> <property name="out.dex.input.absolute.dir" value="${out.classes.absolute.dir}" /> <!-- Intermediate files --> <property name="dex.file.name" value="classes.dex" /> <property name="intermediate.dex.file" location="${out.absolute.dir}/${dex.file.name}" /> <property name="resource.package.file.name" value="${ant.project.name}.ap_" /> <!-- The final package file to generate These can be overridden by setting them earlier to different values --> <property name="out.debug.unaligned.file" location="${out.absolute.dir}/${ant.project.name}-debug-unaligned.apk" /> <property name="out.debug.file" location="${out.absolute.dir}/${ant.project.name}-debug.apk" /> <property name="out.unsigned.file.name" value="${ant.project.name}-unsigned.apk" /> <property name="out.unsigned.file" location="${out.absolute.dir}/${out.unsigned.file.name}" /> <property name="out.unaligned.file.name" value="${ant.project.name}-unaligned.apk" /> <property name="out.unaligned.file" location="${out.absolute.dir}/${out.unaligned.file.name}" /> <property name="out.release.file.name" value="${ant.project.name}-release.apk" /> <property name="out.release.file" location="${out.absolute.dir}/${out.release.file.name}" /> <!-- set some properties used for filtering/override. If those weren't defined before, then this will create them with empty values, which are then ignored by the custom tasks receiving them. --> <property name="version.code" value="" /> <property name="aapt.resource.filter" value="" /> <property name="filter.abi" value="" /> <!-- Verbosity --> <property name="verbose" value="false" /> <!-- This is needed by emma as it uses multilevel verbosity instead of simple 'true' or 'false' The property 'verbosity' is not user configurable and depends exclusively on 'verbose' value.--> <condition property="verbosity" value="verbose" else="quiet"> <istrue value="${verbose}" /> </condition> <!-- This is needed to switch verbosity of zipalign. Depends exclusively on 'verbose' --> <condition property="v.option" value="-v" else=""> <istrue value="${verbose}" /> </condition> <!-- This is needed to switch verbosity of dx. Depends exclusively on 'verbose' --> <condition property="verbose.option" value="--verbose" else=""> <istrue value="${verbose}" /> </condition> <!-- properties for signing in release mode --> <condition property="has.keystore"> <and> <isset property="key.store" /> <length string="${key.store}" when="greater" length="0" /> <isset property="key.alias" /> </and> </condition> <condition property="has.password"> <and> <isset property="has.keystore" /> <isset property="key.store.password" /> <isset property="key.alias.password" /> </and> </condition> <!-- Tools --> <condition property="exe" value=".exe" else=""><os family="windows" /></condition> <property name="adb" location="${android.tools.dir}/adb${exe}" /> <property name="zipalign" location="${android.tools.dir}/zipalign${exe}" /> <!-- Emma configuration --> <property name="emma.dir" value="${sdk.dir}/tools/lib" /> <path id="emma.lib"> <pathelement location="${emma.dir}/emma.jar" /> <pathelement location="${emma.dir}/emma_ant.jar" /> </path> <taskdef resource="emma_ant.properties" classpathref="emma.lib" /> <!-- End of emma configuration --> <!-- Macros --> <!-- Configurable macro, which allows to pass as parameters output directory, output dex filename and external libraries to dex (optional) --> <macrodef name="dex-helper"> <element name="external-libs" optional="yes" /> <element name="extra-parameters" optional="yes" /> <sequential> <echo>Converting compiled files and external libraries into ${intermediate.dex.file}...</echo> <apply executable="${dx}" failonerror="true" parallel="true"> <arg value="--dex" /> <arg value="--output=${intermediate.dex.file}" /> <extra-parameters /> <arg line="${verbose.option}" /> <arg path="${out.dex.input.absolute.dir}" /> <fileset dir="${external.libs.absolute.dir}" includes="*.jar" /> <path refid="android.libraries.jars" /> <external-libs /> </apply> </sequential> </macrodef> <!-- This is macro that enable passing variable list of external jar files to ApkBuilder Example of use: <package-helper sign.package="true" output.filepath="/path/to/foo.apk"> <extra-jars> <jarfolder path="my_jars" /> <jarfile path="foo/bar.jar" /> <jarfolder path="your_jars" /> </extra-jars> </package-helper> --> <macrodef name="package-helper"> <attribute name="sign.package" /> <attribute name="output.filepath" /> <element name="extra-jars" optional="yes" /> <sequential> <apkbuilder outfolder="${out.absolute.dir}" resourcefile="${resource.package.file.name}" apkfilepath="@{output.filepath}" signed="@{sign.package}" debug="${manifest.debuggable}" abifilter="${filter.abi}" verbose="${verbose}" hascode="${manifest.hasCode}"> <dex path="${intermediate.dex.file}"/> <sourcefolder path="${source.absolute.dir}"/> <sourcefolder refid="android.libraries.src"/> <jarfolder path="${external.libs.absolute.dir}" /> <jarfolder refid="android.libraries.libs" /> <nativefolder path="${native.libs.absolute.dir}" /> <nativefolder refid="android.libraries.libs" /> <extra-jars/> </apkbuilder> </sequential> </macrodef> <!-- This is macro which zipaligns in.package and outputs it to out.package. Used by targets debug, -debug-with-emma and release.--> <macrodef name="zipalign-helper"> <attribute name="in.package" /> <attribute name="out.package" /> <sequential> <echo>Running zip align on final apk...</echo> <exec executable="${zipalign}" failonerror="true"> <arg line="${v.option}" /> <arg value="-f" /> <arg value="4" /> <arg path="@{in.package}" /> <arg path="@{out.package}" /> </exec> </sequential> </macrodef> <!-- This is macro used only for sharing code among two targets, -install and -install-with-emma which do exactly the same but differ in dependencies --> <macrodef name="install-helper"> <sequential> <echo>Installing ${out.debug.file} onto default emulator or device...</echo> <exec executable="${adb}" failonerror="true"> <arg line="${adb.device.arg}" /> <arg value="install" /> <arg value="-r" /> <arg path="${out.debug.file}" /> </exec> </sequential> </macrodef> <!-- Rules --> <target name="use" description="Use the Task" > <nowtime/> </target> <!-- Creates the output directories if they don't exist yet. --> <target name="-dirs"> <echo>Creating output directories if needed...</echo> <mkdir dir="${resource.absolute.dir}" /> <mkdir dir="${external.libs.absolute.dir}" /> <mkdir dir="${out.absolute.dir}" /> <if condition="${manifest.hasCode}"> <then> <mkdir dir="${gen.absolute.dir}" /> <mkdir dir="${out.classes.absolute.dir}" /> </then> </if> </target> <!-- empty default pre-build target. Create a similar target in your build.xml and it'll be called instead of this one. --> <target name="-pre-build"/> <!-- Generates the R.java file for this project's resources. --> <target name="generateR" depends="cleanR,-dirs, -pre-build"> <if condition="${manifest.hasCode}"> <then> <echo>Generating R.java / Manifest.java from the resources...</echo> <nowtime/> <aapt executable="${aapt}" command="package" verbose="${verbose}" manifest="AndroidManifest.xml" androidjar="${android.jar}" rfolder="${gen.absolute.dir}"> <res path="${resource.absolute.dir}" /> </aapt> <nowtime/> </then> <else> <echo>hasCode = false. Skipping...</echo> </else> </if> </target> <!-- Generates java classes from .aidl files. --> <target name="-aidl" depends="-dirs"> <if condition="${manifest.hasCode}"> <then> <echo>Compiling aidl files into Java classes...</echo> <aidl executable="${aidl}" framework="${android.aidl}" genFolder="${gen.absolute.dir}"> <source path="${source.absolute.dir}"/> <source refid="android.libraries.src"/> </aidl> </then> <else> <echo>hasCode = false. Skipping...</echo> </else> </if> </target> <!-- empty default pre-compile target. Create a similar target in your build.xml and it'll be called instead of this one. --> <target name="-pre-compile"/> <!-- Compiles this project's .java files into .class files. --> <target name="compile" depends="generateR, -aidl, -pre-compile" description="Compiles project's .java files into .class files"> <if condition="${manifest.hasCode}"> <then> <!-- If android rules are used for a test project, its classpath should include tested project's location --> <condition property="extensible.classpath" value="${tested.project.absolute.dir}/bin/classes" else="."> <isset property="tested.project.absolute.dir" /> </condition> <condition property="extensible.libs.classpath" value="${tested.project.absolute.dir}/libs" else="./libs"> <isset property="tested.project.absolute.dir" /> </condition> <javac encoding="GBK" target="1.5" debug="true" extdirs="" destdir="${out.classes.absolute.dir}" bootclasspathref="android.target.classpath" verbose="${verbose}" classpath="${extensible.classpath}" classpathref="android.libraries.jars"> <src path="${reader_service_project}/src" /> <src path="${reader_data_project}/src" /> <src path="${reader_service_project}/gen" /> <src path="${reader_data_project}/gen" /> <src path="${source.absolute.dir}" /> <src path="${gen.absolute.dir}" /> <src refid="android.libraries.src" /> <classpath> <fileset dir="${reader_lib_project}/lib" includes="*.jar" /> <fileset dir="${external.libs.absolute.dir}" includes="*.jar" /> <fileset dir="${extensible.libs.classpath}" includes="*.jar" /> </classpath> </javac> </then> <else> <echo>hasCode = false. Skipping...</echo> </else> </if> </target> <!-- Compiles this project's .java files into .class files. --> <target name="simplecompile" depends="-pre-compile" description="Compiles project's .java files into .class files"> <echo>simplecompile start at time</echo><nowtime/> <if condition="${manifest.hasCode}"> <then> <!-- If android rules are used for a test project, its classpath should include tested project's location --> <condition property="extensible.classpath" value="${tested.project.absolute.dir}/bin/classes" else="."> <isset property="tested.project.absolute.dir" /> </condition> <condition property="extensible.libs.classpath" value="${tested.project.absolute.dir}/libs" else="./libs"> <isset property="tested.project.absolute.dir" /> </condition> <javac encoding="GBK" target="1.5" debug="true" extdirs="" destdir="${out.classes.absolute.dir}" bootclasspathref="android.target.classpath" verbose="${verbose}" classpath="${extensible.classpath}" classpathref="android.libraries.jars"> <src path="${reader_service_project}/src" /> <src path="${reader_data_project}/src" /> <src path="${reader_service_project}/gen" /> <src path="${reader_data_project}/gen" /> <src path="${source.absolute.dir}" /> <src path="${gen.absolute.dir}" /> <src refid="android.libraries.src" /> <classpath> <fileset dir="${reader_lib_project}/lib" includes="*.jar" /> <fileset dir="${external.libs.absolute.dir}" includes="*.jar" /> <fileset dir="${extensible.libs.classpath}" includes="*.jar" /> </classpath> </javac> </then> <else> <echo>hasCode = false. Skipping...</echo> </else> </if> <echo>simplecompile end at time</echo><nowtime/> </target> <!-- empty default post-compile target. Create a similar target in your build.xml and it'll be called instead of this one. --> <target name="-post-compile"/> <!-- Converts this project's .class files into .dex files --> <target name="-dex" depends="simplecompile, -post-compile" unless="do.not.compile"> <if condition="${manifest.hasCode}"> <then> <dex-helper /> </then> <else> <echo>hasCode = false. Skipping...</echo> </else> </if> </target> <!-- Converts this project's .class files into .dex files --> <target name="-simpledex" depends="simplecompile, -post-compile" unless="do.not.compile"> <echo>-simpledex start at time</echo><nowtime/> <if condition="${manifest.hasCode}"> <then> <dex-helper /> </then> <else> <echo>hasCode = false. Skipping...</echo> </else> </if> <echo>-simpledex end at time</echo><nowtime/> </target> <!-- Puts the project's resources into the output package file This actually can create multiple resource package in case Some custom apk with specific configuration have been declared in default.properties. --> <target name="-package-resources"> <echo>Packaging resources start at time</echo> <echo>Packaging resources start at time</echo><nowtime/> <aapt executable="${aapt}" command="package" versioncode="${version.code}" manifest="AndroidManifest.xml" assets="${asset.absolute.dir}" androidjar="${android.jar}" apkfolder="${out.absolute.dir}" resourcefilename="${resource.package.file.name}" resourcefilter="${aapt.resource.filter}"> <res path="${resource.absolute.dir}" /> <!-- <nocompress /> forces no compression on any files in assets or res/raw --> <!-- <nocompress extension="xml" /> forces no compression on specific file extensions in assets and res/raw --> </aapt> <echo>Packaging resources end at time</echo><nowtime/> </target> <!-- Packages the application and sign it with a debug key. --> <target name="-package-debug-sign" depends="-dex, -package-resources"> <package-helper sign.package="true" output.filepath="${out.debug.unaligned.file}" /> </target> <!-- Packages the application and sign it with a debug key. --> <target name="-simplepackage-debug-sign" depends="-simpledex, -package-resources"> <package-helper sign.package="true" output.filepath="${out.debug.unaligned.file}" /> </target> <!-- Packages the application without signing it. --> <target name="-package-release" depends="-dex, -package-resources"> <package-helper sign.package="false" output.filepath="${out.unsigned.file}"/> </target> <target name="-compile-tested-if-test" if="tested.project.dir" unless="do.not.compile.again"> <subant target="compile"> <fileset dir="${tested.project.absolute.dir}" includes="build.xml" /> </subant> </target> <target name="-simplecompile-tested-if-test" if="tested.project.dir" unless="do.not.compile.again"> <subant target="simplecompile"> <fileset dir="${tested.project.absolute.dir}" includes="build.xml" /> </subant> </target> <!-- Builds debug output package, provided all the necessary files are already dexed --> <target name="debug" depends="-compile-tested-if-test, -package-debug-sign" description="Builds the application and signs it with a debug key."> <zipalign-helper in.package="${out.debug.unaligned.file}" out.package="${out.debug.file}" /> <echo>Debug Package: ${out.debug.file}</echo> </target> <!-- Builds debug output package, provided all the necessary files are already dexed --> <target name="simpledebug" depends="-simplecompile-tested-if-test, -simplepackage-debug-sign" description="Builds the application and signs it with a debug key."> <echo>Debug Package: ${out.debug.unaligned.file}</echo> <!-- <zipalign-helper in.package="${out.debug.unaligned.file}" out.package="${out.debug.file}" /> <echo>Debug Package: ${out.debug.file}</echo> --> </target> <!-- called through target 'release'. Only executed if the keystore and key alias are known but not their password. --> <target name="-release-prompt-for-password" if="has.keystore" unless="has.password"> <!-- Gets passwords --> <input message="Please enter keystore password (store:${key.store}):" addproperty="key.store.password" /> <input message="Please enter password for alias '${key.alias}':" addproperty="key.alias.password" /> </target> <!-- called through target 'release'. Only executed if there's no keystore/key alias set --> <target name="-release-nosign" unless="has.keystore"> <echo>No key.store and key.alias properties found in build.properties.</echo> <echo>Please sign ${out.unsigned.file} manually</echo> <echo>and run zipalign from the Android SDK tools.</echo> </target> <target name="-set-release-mode"> <property name="build.mode.release" value="true"/> </target> <!-- This runs -package-release and -release-nosign first and then runs only if release-sign is true (set in -release-check, called by -release-no-sign)--> <target name="release" depends="-set-release-mode, -package-release, -release-prompt-for-password, -release-nosign" if="has.keystore" description="Builds the application. The generated apk file must be signed before it is published."> <!-- Signs the APK --> <echo>Signing final apk...</echo> <signjar jar="${out.unsigned.file}" signedjar="${out.unaligned.file}" keystore="${key.store}" storepass="${key.store.password}" alias="${key.alias}" keypass="${key.alias.password}" verbose="${verbose}" /> <!-- Zip aligns the APK --> <zipalign-helper in.package="${out.unaligned.file}" out.package="${out.release.file}" /> <echo>Release Package: ${out.release.file}</echo> </target> <target name="install" depends="debug" description="Installs/reinstalls the debug package onto a running emulator or device. If the application was previously installed, the signatures must match." > <install-helper /> </target> <target name="-uninstall-check"> <condition property="uninstall.run"> <isset property="manifest.package" /> </condition> </target> <target name="-uninstall-error" depends="-uninstall-check" unless="uninstall.run"> <echo>Unable to run 'ant uninstall', manifest.package property is not defined. </echo> </target> <!-- Uninstalls the package from the default emulator/device --> <target name="uninstall" depends="-uninstall-error" if="uninstall.run" description="Uninstalls the application from a running emulator or device."> <echo>Uninstalling ${manifest.package} from the default emulator or device...</echo> <exec executable="${adb}" failonerror="true"> <arg line="${adb.device.arg}" /> <arg value="uninstall" /> <arg value="${manifest.package}" /> </exec> </target> <target name="clean" description="Removes output files created by other targets."> <delete dir="${out.absolute.dir}" verbose="${verbose}" /> <delete dir="${gen.absolute.dir}" verbose="${verbose}" /> </target> <target name="cleanR" description="Removes R.java file created by other targets."> <delete dir="${gen.absolute.dir}" verbose="${verbose}" /> </target> <!-- Targets for code-coverage measurement purposes, invoked from external file --> <!-- Emma-instruments tested project classes (compiles the tested project if necessary) and writes instrumented classes to ${instrumentation.absolute.dir}/classes --> <target name="-emma-instrument" depends="compile"> <echo>Instrumenting classes from ${out.absolute.dir}/classes...</echo> <!-- It only instruments class files, not any external libs --> <emma enabled="true"> <instr verbosity="${verbosity}" mode="overwrite" instrpath="${out.absolute.dir}/classes" outdir="${out.absolute.dir}/classes"> </instr> <!-- TODO: exclusion filters on R*.class and allowing custom exclusion from user defined file --> </emma> </target> <target name="-dex-instrumented" depends="-emma-instrument"> <dex-helper> <extra-parameters> <arg value="--no-locals" /> </extra-parameters> <external-libs> <fileset file="${emma.dir}/emma_device.jar" /> </external-libs> </dex-helper> </target> <!-- Invoked from external files for code coverage purposes --> <target name="-package-with-emma" depends="-dex-instrumented, -package-resources"> <package-helper sign.package="true" output.filepath="${out.debug.unaligned.file}"> <extra-jars> <!-- Injected from external file --> <jarfile path="${emma.dir}/emma_device.jar" /> </extra-jars> </package-helper> </target> <target name="-debug-with-emma" depends="-package-with-emma"> <zipalign-helper in.package="${out.debug.unaligned.file}" out.package="${out.debug.file}" /> </target> <target name="-install-with-emma" depends="-debug-with-emma"> <install-helper /> </target> <!-- End of targets for code-coverage measurement purposes --> <target name="help"> <echo>Modified Android Ant Build. Available targets:</echo> <echo> generateR: Generates the R.java file for this project's resources.</echo> <echo> simplecompile: Compiles project's .java files into .class files.</echo> <echo> simpledebug: Builds the application and signs it with a debug key.</echo> <!-- displays starts at col 13 |13 80| --> <echo>Android Ant Build. Available targets:</echo> <echo> help: Displays this help.</echo> <echo> clean: Removes output files created by other targets.</echo> <echo> compile: Compiles project's .java files into .class files.</echo> <echo> debug: Builds the application and signs it with a debug key.</echo> <echo> release: Builds the application. The generated apk file must be</echo> <echo> signed before it is published.</echo> <echo> install: Installs/reinstalls the debug package onto a running</echo> <echo> emulator or device.</echo> <echo> If the application was previously installed, the</echo> <echo> signatures must match.</echo> <echo> uninstall: Uninstalls the application from a running emulator or</echo> <echo> device.</echo> </target> </project>??原创，转载请注明原始地址 :)